Skip to main content

How to Crochet a Hat with a 3D Flower – Free Crochet Beanie Pattern

This crochet beanie features a beautiful 3D layered flower, making it a lovely handmade accessory.

In this post, you'll find the complete written pattern for both the hat and the flower, along with helpful tips and a step-by-step video tutorial.

Let's get started!










Prefer to follow along with a video? Watch the tutorial below!




Materials

  • Yarn: 1 mm cotton yarn, held double

  • Yarn Amount: Approximately 86 g

  • Crochet Hook: 4.5 mm

  • Scissors

  • Yarn needle

Yarn Notes:

I used 1 mm cotton yarn held double throughout this project. You can also use other yarn types or weights depending on your preference. Just keep in mind that changing the yarn or hook size may affect the finished size and texture.

I recommend making a small swatch first if you're using a different yarn.



Finished Size

  • Crown Diameter: Approximately 17 cm

  • Brim Width: Approximately 25 cm when laid flat

  • Brim Circumference: Approximately 50 cm

  • Fits Head Circumference: Approximately 56 cm

The hat has a little stretch, making it comfortable to wear.



Abbreviations (US Crochet Terms)

  • MR – Magic Ring

  • ch – Chain

  • sl st – Slip Stitch

  • sc – Single Crochet

  • dc – Double Crochet

  • inc – Increase (2 dc in the same stitch)

  • BPdc – Back Post Double Crochet

  • st(s) – Stitch(es)

  • rep – Repeat


Important Notes

  1. The pattern is written using US crochet terminology.

  2. Chain 2 at the beginning of each round. The starting chain does not count as a stitch.

  3. Join each round with a slip stitch.

  4. The hat is worked in joined rounds.

  5. The flower is made separately and sewn onto the finished hat.

  6. Stitch counts are provided at the end of the crown increase rounds.


Part 1: Crochet Hat

Crown

Start with a magic ring.

Round 1: Ch 2, work 12 dc into the magic ring. Sl st to join. (12 sts)

Round 2: Ch 2, work 2 dc in each stitch around. Sl st to join. (24 sts)

Round 3: Ch 2, *1 dc in the next stitch, 2 dc in the next stitch.* Repeat from * to * around. Sl st to join. (36 sts)

Round 4: Ch 2, *1 dc in each of the next 2 stitches, 2 dc in the next stitch.* Repeat from * to * around. Sl st to join. (48 sts)

Round 5: Ch 2, *2 dc in the next stitch, 1 dc in each of the next 3 stitches.* Repeat from * to * around. Sl st to join. (60 sts)

Round 6: Ch 2, *1 dc in each of the next 4 stitches, 2 dc in the next stitch.* Repeat from * to * around. Sl st to join. (72 sts)

Round 7: Ch 2, *2 dc in the next stitch, 1 dc in each of the next 5 stitches. * Repeat from * to * around. Sl st to join. (84 sts)

After Round 7, the crown should measure approximately 17 cm in diameter.








Optional Increase Round for a Larger Size

If you need a larger hat, you can add one more increase round.

Round 8 (Optional): Ch 2, *1 dc in each of the next 6 stitches, 2 dc in the next stitch.* Repeat from * to * around. Sl st to join. (96 sts)

After this additional round, continue working with 96 stitches instead of 84 stitches.


Hat Body

After completing the crown, continue working in single crochet without increasing.

Body Round: Ch 2, work 1 sc in each stitch around. Sl st to join.

Repeat this round until the hat reaches your desired length.

  • If you completed Round 7, work 84 sc in each round.

  • If you added the optional Round 8, work 96 sc in each round.

Make sure to try on the hat occasionally to check the length before starting the brim.



Brim

The brim consists of four rounds: two rounds of back post double crochet followed by two rounds of regular double crochet.

Continue using the same stitch count as the hat body.

Brim Round 1

Ch 2, work 1 BPdc around the post of each stitch from the previous round. Sl st to join.

  • 84 BPdc, or 96 BPdc if you made the optional increase round.







Brim Round 2

Ch 2, work 1 BPdc around the post of each stitch from the previous round. Sl st to join.

  • 84 BPdc, or 96 BPdc for the larger size.

Brim Round 3

Ch 2, work 1 dc into the top of each stitch around. Sl st to join.

  • 84 dc, or 96 dc for the larger size.

Brim Round 4

Ch 2, work 1 dc into the top of each stitch around. Sl st to join.

  • 84 dc, or 96 dc for the larger size.

Fasten off and weave in the loose ends.



Part 2: Crochet 3D Flower

Now let's make the layered flower that decorates the hat!

The flower has three layers of petals. Each layer is worked into chain spaces created between the petals of the previous layer.

The chain spaces for the second and third layers are brought behind the previous layer of petals. This creates a beautiful three-dimensional effect.

Flower Center

Round 1: Ch 2, work 18 dc into a magic ring. Sl st to join. (18 sts)

First Layer of Petals

Round 2: Ch 2, skip the next 2 stitches, sl st into the next stitch, ch 2. Repeat from * to * around to create 6 chain spaces. Sl st into the first chain space to join.

Round 3: Into the first chain space, work:

1 sc, ch 1, 7 dc, 1 sc.

This forms one petal.

Repeat the same pattern in each of the remaining chain spaces. You will have 6 petals in total.

Sl st into the first ch-1 space to join.

Foundation for the Second Layer

Round 4: Ch 3, sl st into the space between the next two petals. Repeat this pattern around until you have 6 chain spaces. Sl st to join.

Now gently bring all 6 chain spaces behind the first layer of petals.

These chain spaces will be used to create the second layer of petals.

Second Layer of Petals

Round 5: Into the first chain space, work:

1 sc, ch 1, 9 dc, 1 sc.

This forms one petal.

Repeat the same pattern in each of the remaining chain spaces. You will have 6 petals in total.

Sl st into the joining point between the last and first petals.

Optional: Add a Third Layer of Petals

if you'd like to make your flower fuller and more dimensional, continue with the following two rounds.

Round 6: Ch 4, sl st into the joining point between the next two petals. Repeat this pattern around until you have 6 chain spaces. Sl st to join.

Bring all 6 chain spaces behind the second layer of petals.

These chain spaces will be used to create the final layer of petals.

Round 7: Into the first chain space, work:

1 sc, ch 1, 11 dc, 1 sc.

This forms one petal.

Repeat the same pattern in each of the remaining chain spaces. You will have 6 petals in total.

Sl st to join. Fasten off, leaving a long yarn tail for attaching the flower to the hat.



Part 3: Finishing

Position the flower on the hat wherever you like.

Using the long yarn tail and a yarn needle, sew the flower securely onto the hat. Make sure to attach it through the center and the back of the flower so that all three layers stay in place.

Weave in any remaining loose ends.

And your crochet flower hat is complete!



Video Tutorial

Would you like to see how each stitch is made?

You can watch the full step-by-step video tutorial below. It includes the crown, hat body, brim, and the three-dimensional flower.

Watch the Full Video Tutorial

https://youtu.be/mFnTq5MjToo

I hope you enjoy making this crochet hat! Thank you for visiting my blog and crocheting along with me.

Happy crocheting! ♡

Comments

Popular posts from this blog

Lacey Crochet Hat Tutorial | Easy Lace Crochet Pattern Hat for Beginners

This crochet hat features a beautiful openwork stitch pattern and is easy to customize to your preferred length. Prefer to follow along with a video? Watch the tutorial below! https://youtu.be/gqwfWYC64KA Materials 4.5 mm crochet hook Yarn of your choice Scissors Yarn needle Abbreviations (US Terms) MR – Magic Ring ch – Chain sl st – Slip Stitch sc – Single Crochet dc – Double Crochet st(s) – Stitch(es) sp – Space inc – Increase (2 dc in the same stitch) Notes This pattern is worked in joined rounds. At the beginning of each round, chain 2. The turning chain does not count as a stitch. Join each round with a slip stitch. The finished size may vary depending on your yarn and tension. Pattern Crown Round 1: Make a magic ring, ch 2, work 12 dc into the ring. Join with a sl st. (12 sts) Round 2: Ch 2, work 2 dc in each stitch around. Join with a sl st. (24 sts) Round 3: Ch 2, (2 dc in the next st, 1 dc in the next st) repeat around. Join with a sl st. (36 sts) Round 4: Ch 2, (1 dc in ...

How to Crochet a Puff Stitch Coin Purse – Free Crochet Pattern

This cute crochet coin purse features a beautiful puff stitch design and a button flap closure. It's a lovely little project for keeping coins and other small essentials. In this post, you'll find the complete written pattern, along with a step-by-step video tutorial to help you make your own. Let's get started! Prefer to follow along with a video? Watch the step-by-step video tutorial here:  Materials Yarn: Chenille yarn or 4-ply milk cotton yarn Crochet Hook: 3 mm Button: 1 Scissors Yarn needle Yarn Notes I used chenille yarn for this project, but you can also use 4-ply milk cotton yarn. Different yarn types may affect the finished size and texture, so your coin purse may look slightly different from the sample. Finished Size Length: Approximately 11 cm Height: Approximately 10 cm Please note that the finished size may vary depending on your yarn, hook size, and tension. Abbreviations (US Crochet Terms) ch – Chain sl st – Slip Stitch sc – Single Crochet dec – Decrease...